Geoff1946

If it's a small job, such as a display cabinet and you want a fixed level just put a resistor in series. Just done that for one of my...

I just looked on the CAME website and there appear to be downloadable manuals. Have you any test gear? If it were my system, I would...

No idea of make, etc, but I have a friend with electric gates which have a recurring problem with slugs getting into the control box and...

I admit to being a skeptic. Maybe human activity is accelerating natural change but short of the HR becoming extinct I don't believe...

With rack mounted equipment it is important to ensure that earthing is maintained between powered rack units and the cabinet...

Thank you. I'll have to think about that; it's getting a bit deep for me. I'm running Windows 10 which has Edge but I usually revert to...

Thank you for the response. I am doing that. It gives me the option to say where it is stored, or automatically put it in the...

Check you haven't caught one of the conductors with a plate screw.

Hi, Are there any Network Video Recorder experts on here, who could perhaps help me with a problem? I have an EAGLE-NVR-4-2BUL-8MP-1TB...

I would guess that someone damaged the cable and didn't want to admit to it. So, bodge it, bury it and leave pronto. A paving...

As it was once explained to me, "fuses are for short circuit protection, circuit breakers give overload protection". An over...

If three lamps are working and one not surely the fault has to be on the feed to the duff one? Probably a broken connection where-ever...

They may be willing to fit an 80amp fuse. Should be adequate and save you a lot of money if the 100amp demands a cable change. The DNOs...

Whoever made the installation needs a good talking to ! At least! Even the most basic dead or live testing would have shown up the...

It sound as though the manufacturer's instructions don't say very much. I would be dubious about wiring it straight onto a 32amp supply.