truffle pig

I wouldn't choose one of those Wago Boxes for extending 2.5mm T&E's.... They can sometimes be ok for a few 1.0mm / 1.5mm T&E lighting...

I think there is something that needs to be done about the state of extractor fans as there are some terrible installs out there and...

How long can this endless stream of regulation, courses and expiring certs go on before it drives people away from the industry because...

(a) Do I read this that you are considering connecting a 2.5mm armoured cable directly onto a 13A plug? (b) Why are you thinking of...

you probaly have RCD protection for the sockets already so don't need a RCD socket- check your board.

I always use CEF. I never use them for anything else as they are so expensive, but for some reason they are cheap to do MFT...

Wholesaler trade day. Think I paid £45+vat. Done by a professional company with fully traceable certificates. Just means only 1 day...

HFM?????! I get mine done when wholesalers have a Trade day. Last time it was about £40, that was 2 months ago

I always use the copy tapes, can’t say I’ve ever had a problem with them

To be frank, if you've just bought a new house, spending around £1K is not even a drop in the ocean - so my advice to you IS upgrade the...

I can't quite figure out from your post if remedial work has been carried out to make the installation satisfactory for continued use...

So you spent many many £000's on buying a house including due dilligence and getting an eicr done, but have decided not so spend a few...

I think you would probably need 17mm heat shrink for the 2.5mm and 11.7mm for the 1.00mm

The incoming gas and water would need to be assessed to determine whether they would need bonding (less than 22k ohms to earth and they...

depends on the length of the cable - you would have to do a volt drop calculation to work out the capacity