Andy™'s latest activity

Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  • Andy™
    Andy™ replied to the thread Electric Gates.
    I've already told you that
  • Andy™
    Andy™ replied to the thread Electric Gates.
    of course it doesn't. like i said in an earlier post, they are not the manufacturer of the gate, just some of the components. there is...
  • Andy™
    Andy™ replied to the thread Electric Gates.
    £1300 for a motor change is excessive. only really ever gets to that if its an old motor and the foundation box also has to be changed...
  • Andy™
    Andy™ replied to the thread Electric Gates.
    not such thing exists - you can get a manual for the controller & manuals for the motors, loop controller etc but but there isn't a...
  • Andy™
    Andy™ replied to the thread Electric Gates.
    that little box is nothing to do with the motor, and the motor is almost certainly not the problem to start with
  • Andy™
    Andy™ replied to the thread Electric Gates.
    basically a loop of wire in the ground, detects vehicles. you see them at traffic lights etc, that square cut in the tarmax in this...
  • Andy™
    Andy™ replied to the thread Electric Gates.
    thats a loop controller. it wont cause your RCD to trip. once reset / powerered on the green light should not stay on. if it is, then...
  • Andy™
    missed that... just went by the original 40 to 50
  • Andy™
    Andy™ replied to the thread Electric Gates.
    working doesn't mean safe. but hey, as long as its not you that's get injured / killed by them who cares
  • Andy™
    changing MCB' to higher rating for the guests whilst you're not around? guessing its the inlaws you're trying to kill & a nice insurance...
  • Andy™
    Andy™ replied to the thread Electric Gates.
    ground loop forget about it. can't detect people only vehicles. photocell on its own is non compliant. it needssafety edges. and i would...
  • Andy™
    Andy™ replied to the thread Electric Gates.
    its possible its the motor, there in the ground. they get wet and do fail and looking at the wiring in the control board, id say you...
  • Andy™
    Andy™ replied to the thread Stainless steel kitchen worktops.
    you mean 'its not the answer i wanted, but thanks anyway'. sounds about right.
  • Andy™
    Andy™ replied to the thread Stainless steel kitchen worktops.
    so.. if its class 2 then it can't become live. if its class 1 then it'll be earthed. end result of a fault would be the same if the...
  • Andy™
    Andy™ replied to the thread Stainless steel kitchen worktops.
    where's the risk going to come from?
Top