Andy™'s latest activity

so basically admitting if he was quiet he would be requesting unnecessary work if tails are 25 then this is just creating work. open...

no it doesn't. you've paid VAT on materials, fuel etc so customer is paying VAT, just indirectly. VAT registered will be more, but not...

that also reminds me of a job a few years ago. some cowboy replaced a load of highbays. existing lights had an IEC plug on the body and...

as above, cpc should be taken to each accessory

its from the stone age and has a few dip switches & pots. theres no setup menu to be able to do anything

like i said, you need to bypass it and its contacts are wired normally closed. this isn't the type of thing you should be ******* about...

maybe better labels / warnings on the isolators that they are for emergency / isolation only

for the odd one off, not really much of an issue. he's semi ertired. few extra minutes writing out a cert isn't going to be problematic...

because its a safety device. its wired normally closed. removing / disconnecting it won't make any difference, it needs to be linked out

why? you can use blank forms from BS7671. no need for software

you mean the box wired into CX & 2 that you couldn't find? still not made by came, just a generic box that's got their logo on it...

I've already told you that

of course it doesn't. like i said in an earlier post, they are not the manufacturer of the gate, just some of the components. there is...

£1300 for a motor change is excessive. only really ever gets to that if its an old motor and the foundation box also has to be changed...

not such thing exists - you can get a manual for the controller & manuals for the motors, loop controller etc but but there isn't a...