Andy™'s latest activity

depends how much leakage it has

you could use a 10mA RCD for the washer which will trip first at lower current however in case of a fault then chances are both will...

whatever you fit will help, but they will not be enough on their own you'll use pretty much whatever you generate in real time so no...

wonder if the report has test results inc Zs of all circuits and Zdb?

why from a ring and not a radial?

no definition in BS7671 but id go with domestic would be for a dwelling. a scout hut isn't a dwelling so commercial

probably there to start with and has been repaired and put back in same location. if your customer wants it moved then they can pay DNO...

people would rather spend money on something they can show off like a new kitchen or bathroom, rather than spend a few £ on something...

last assessment was 2018.... so much easier not being a member

i usually use normal labels then clear heatshrink over them

so you're 'qualified' yet your first question was can you put 1.5kw (6.52a) through a 6a MCB.... doesn't say much for your training /...

you can pretty much guarantee that the 16m isn't clipped direct and is installed in a method where its capacity is less than 80a...

that needs to be done properly, wrapping in tape like that is not acceptable cables should be further down but often are like that...

one of the heating elements has failed

motor is probably too small so no matter what voltage / power you put it, its not going to work. bit like putting a chainsaw engine into...