Help Support Talk Electrician Forum:

Barx
Reaction score
19

Latest activity Postings Media Albums About

    • Barx
      Your FiT is paid on what you generate as recorded on your generation meter, regardless of whether you use it or not. You 'Export...
    • Barx
      I thought they both require you to have the NVQ lvl3 now? Could be wrong...
    • Barx
      Barx replied to the thread dimmable led lamp making a noise.
      I could be completely wrong, but most buzzing noises when dimming a light are down to the dimmer.
    • Barx
      Barx replied to the thread Grid Fault message recurring.
      Also bear in mind that if your multimeter is not True RMS, the actual voltage could be higher still, especially given that the output...
    • Barx
      Barx replied to the thread Series or Parallel.
      With the figure given so far, tecnically you could do either. I assuming you do realise the inverter of 5kW is quite a bit over sized...
    • Barx
      Barx reacted to Sinewaved's post in the thread Grid Fault message recurring with Like Like.
      To find the grid voltage,long press the up arrow to get to status long press again and the tap the arrow until you get to grid voltage...
    • Barx
      Barx reacted to binky's post in the thread Grid Fault message recurring with Haha Haha.
      coplain to DNO, request they monitor your supply for a week of so, sounds like a duff local transformer - solar is good at finding those!
    • Barx
      Barx replied to the thread Grid Fault message recurring.
      just for perspective. 253v is 'too high'. Edit: I'm just trying to remember what most inverters are set to. It's been a while since...
    • Barx
      Barx replied to the thread Grid Fault message recurring.
      Are you sure it just says 'grid fault'? According to the manual, there isn't such a fault message. You have: Grid Lost Fault Grid Volt...
    • Barx
      Barx replied to the thread Series or Parallel.
      How many trackers does the inverter (MPPT's) have? and what is the current ratings for the inverter?
    • Barx
      Barx replied to the thread Solar System Review.
      @Cr4zySmurf Well, this post, along with your other one regarding the panels does not paint a good picture of the installers...
    • Barx
      Barx replied to the thread Solar Panel Damage Review.
      That's pretty shoddy and could easily have been avoided. I would certainly not be happy if that was my place. Sometimes accidents...
    • Barx
      Just to add to my earlier comments you probably need to find better sources of guidance.. What you do need to do is ensure your choice...
    • Barx
      Barx replied to the thread Solar System Review.
      My 2p worth. I've never liked the idea of built in DC isolators as you end up with a situation like this. Where it is not a...
    • Barx
      Barx replied to the thread flat and auger wood bits.
      Bosch self cut every time. you can frop on them cheap enough on amazon. Get a set of them by all means then you will have a variety, but...
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top