binky's latest activity
Help Support Talk Electrician Forum:
-
binky replied to the thread Strange way to supply.So they have taken a supply from the old board to the new board reusing the old enclosure for the cable run? Having worked in a few... -
binky replied to the thread Extractor fan install is noifiable, plus more!!.I can understand some form if certification for new build passive houses, but never a bathroom fan. The trouble with all the...
-
binky reacted to UNG's post in the thread Medical clinic CT scanner with batteries + solar…? with
Like.
Welcome to the forum Shaun While what you are proposing is not impossible in an ideal situation but it may be difficult to deliver... -
binky reacted to ExArmy's post in the thread Extractor fan install is noifiable, plus more!! with Like.
Just had a look through the NAPIT webinars , I notice a building regs one they did in August 2023, the section on part F is around 20...
-
Thought this might interest forum members.
-
binky replied to the thread Adding another circuit to and old cu.Looks like you have an old VOELD below the board, an early form of RCD that I doubt will still be working properly. I would agree...
-
binky replied to the thread Medical clinic CT scanner with batteries + solar…?.You would need a small field of solar panels to power the CT. It is possible to do what you want with batteries charged from solar/ or...
-
binky reacted to HappyHippyDad's post in the thread Is it possible to take power for a 1.kw towel rail heater and extractor from a lighting circuit with Like.
Keep asking questions Peckham. We all started somewhere. Do say you're just starting out next time, rather than DIY post. Apologies if...
-
binky reacted to Peckhamboy72's post in the thread Is it possible to take power for a 1.kw towel rail heater and extractor from a lighting circuit with Like.
Thank you Happy Hippie Dad, appreciate your sentiment. It is tough as I've just done L3 and 18th edition but struggle when it comes to...
-
binky replied to the thread Powering 19v DC motor..I was thinking more about cheap drills and batteries you could cannablise. Maintaining an even cut with a stirmmer is almost impossible...
-
Aldi have recently discontinued their machine. The problem is that the existing cutters resemble strimmers and it's difficult to...
-
Good luck with that one. If the battery and charger are still working and the tool failed (Drill, grinder, saw etc) will they not just...
-
binky replied to the thread Powering 19v DC motor..Have a look at Ryobi, or Lidl / Aldi
-
binky reacted to Andy™'s post in the thread Is it possible to take power for a 1.kw towel rail heater and extractor from a lighting circuit with Like.
why from a ring and not a radial?
-
binky reacted to Sylvia's post in the thread Is it possible to take power for a 1.kw towel rail heater and extractor from a lighting circuit with Haha.
You need to get an Electrician to do this. Where would someone start from? 18th edition regulations? Electrical design? You have to get...