binky's latest activity

that can be much easier said than done, but is alwys the ideal situation. Now I might be little out of touch due to retirement, but it...

ask your wholesaler.

Seen a lot worse, no worries. It's just additional IT stuff. Found seven CU's added to DB's already. All for the same reason. Guess...

That's cheap. I normally pay around £85, we have a company that does calibration work in Plymouth. They have a proper test lab that...

So they have taken a supply from the old board to the new board reusing the old enclosure for the cable run? Having worked in a few...

I can understand some form if certification for new build passive houses, but never a bathroom fan. The trouble with all the...

Welcome to the forum Shaun While what you are proposing is not impossible in an ideal situation but it may be difficult to deliver...

Just had a look through the NAPIT webinars , I notice a building regs one they did in August 2023, the section on part F is around 20...

Thought this might interest forum members.

Looks like you have an old VOELD below the board, an early form of RCD that I doubt will still be working properly. I would agree...

You would need a small field of solar panels to power the CT. It is possible to do what you want with batteries charged from solar/ or...

Keep asking questions Peckham. We all started somewhere. Do say you're just starting out next time, rather than DIY post. Apologies if...

Thank you Happy Hippie Dad, appreciate your sentiment. It is tough as I've just done L3 and 18th edition but struggle when it comes to...

I was thinking more about cheap drills and batteries you could cannablise. Maintaining an even cut with a stirmmer is almost impossible...

Aldi have recently discontinued their machine. The problem is that the existing cutters resemble strimmers and it's difficult to...