binky's latest activity

I fitted them in my outdoor gym log cabin, which has a similar volume to your workshop. I fitted 2 x 600w. I use them to keep the...

The 2 reds and the brown on the middle connection neeed to be connected together these are the live in, looped live out and the live...

TRS gland and tap washers seem to be the way to go :)

Some of my own personal small human offspring have now got small humans of their own... (making me a Grandparent to numerous small...

I like the Santa Tracker run by NORAD.

I have a kewtech multi meter that I use. I will look at that other tester mate thank you.

as someone who converts things to lamps for a bit of hobby, that's poor work. The earth should not only be connected within the plug...

Never actually fitted any. Last shed I built, I fully insulated, which makes a huge difference. Simple small electric oil rad keeps it...

B32 MCB -> Socket -> Unfused RCD Plug -> flex -> 60 Amp MCB -> SWA -> CU -> B32 breaker -> ambitiously loaded ring circuit peaking at...

Like rocking horse droppings 😀

If you haven't got one Seaward PV test gear is good for checking systems. Irradiance meter can also be useful.

you can survive without the rubber gasket, use a TRS gland for the cable entry, or silicone the hole. NB dont bring the cable in through...

I thought builders were expert electricians ;)

The builder: 1 - removed some tails from a full 5 way Henley block to make room to power his new CU for the extension 2 - cut the end...

Thanks for the tip, but nails are not hard to find as they usually have a picture hanging off them.