hi thank you for replying, i know it needs two supplies i just need to know if the non off peak side can be run off an existing ring main via i switched fused spur?
thanks
Hi all, i dont have much call for fitting storage rads in the past so im after a bit of advice.
i have been asked by a customer to replace some old storage heaters within a flat (the flat is in a block of flats and the fabric of the building is all concrete).
anyway replacing the heaters like...
thank you thats really helpfull i appreciate your advice.
just a quick one if i have a meter that is doing like you say regarding the low voltage etc etc so what reading do i choose from (for want of a better expression and i know i should put down the highest reading i get but i cant besure...
i have yet to find a way to null the leads on the zs test on this metrel and i think it does it by calc? and also i have been using the kettle lead with a plug at the end, but on thursday im going to test at the back or the sockets the direct way and see if it makes any difference.
thanks for...
no they are all brand new sockets in place all the connections have been checked and varified and i always check every socket on the ring as normal and i have done the same on all the sockets and the same thing happens i get readings varying from as low as 0.18 up to 0.60 so im mythed by this...
i must admit im planning to upgrade to a fluke tester soon, im just puzzled as i should be expecting lower readings if anything but when they fluctuate like that its just doesnt seem right to me
Hi all im new to this web site but i have found it to be very usefull in finding out information.
i have been an electrician for 6-7 years now.
Now im getting ready for an inspection now joining napit as im now self employed..
im currently re wiring my house and going to use a ring circuit...