I’m not CPS yet, so want the plan approved by building control before commencing. I’d dread to think what feedback I would have received if I’d given them this!
Thank you, very useful feedback.
I suspected what I was proposing was untypical as the parts were not as easily available. I’ll feed back that it would be unwise to link an underpowered generator to a variety of loads, potentially for hours on end.
I’ve had similar feedback from a colleague...
What are your thought on the Heger changeover din switches? The larger ampage unit takes four spaces.
i was thinking of the top CU taking a feed straight from the main Switch, as you would an RCD, then running that route into the RCD, bus at etc.
- Your right about the 17A socket. I spotted that typo and forgotten to update it. No need for the snark though, I’m after constructive feedback! 😉
thanks for your advice everyone.
- the neutral earth link would be made in the cable only as advised (I believe) on the NICEIC tech pages, so...
I've nothing to hide. This is the draft plan I am working on. I'll use it as the basis on my quote, method statement and installation certificate.
You guys seems helpful, so I'd welcome your thoughts.....
providing I can configure the circuits linked to the changeover-RCD busbar to below 40A I should be okay shouldn't I?
The customer has two 12 way CUs alongside one another, each with 7 circuits and three spares. The first CU also has the main switch and non-RCD protected circuits. The second...
thanks guys.
My reference to newbies being torn a new one was not only from this forum, but a general sense across several I've seen recently. I think in most cases it was down to the individual trying to do something they were not competent to be doing and asking REALLY fundamental questions...
Has anyone used a Heger SFT DP changeover switching fitted directly on the DIN rail in the consumer unit rather than using a separate changeover switch enclosure for installing a portable generating set in a fixed (domestic) installation? I am trying to find a solution for limited space in the...
Hi everyone!
I thought I'd introduce myself as a newbie to both this forum and noble profession...
After 25 years in an Operations Manager role in a large corporation I was made redundant last year 🎉. To be honest it was most welcome as it allowed me to try something new.
I retrained* as an...