Fire alarms are graded in catagories>> L (life) or P (property) 1 to 5,
L1 being of the highest prority,(P5 the lowest) so will have more automatic detectors and call points.
Have fixed it Whoooooo!!
in case anybody else has this problem
in the advanced settings under connections > set the "force upstream " to 1396 instead of 1500:S
Has anybody set one of these up as i am having a problem connecting to the ebay site. All other web sites seem to connect but not ebay, have tried connecting using my mobile broadband and know its not the site, just wondered if there is a setting that ebay dosent like?Pray
Rechargeble batteries ideally should be charged at a tenth of their capacity, ie if you have a 2500mah battery it should be charged at 250ma for ten hours.
or 500ma for 5 hours.Guiness Drink
Yes i have seen the motorola web site and it still wont connect to the internet, according to "dodgydave" i have to set the pppoe to pppoa but there is nowhere in the menus to let you do it.
I must say its the biggest bag of sh**e i have ever encountered!
So its going back to them with a...
Has anybody ever set one of these wireless routers up?
I have one on a tiscali line with broadband and cant get the dam X( thing to work.
I bought it from "Digidave" of the internet, (more like Dodgydave) and following their (sh*te) instructions i am to set the pppoe to pppoa (whatever that...
Fire alarms use zone monitoring end of lines or "EOL" modules . If the panel cant see the EOL it will go into a fault on that zone, it could be an open circuit or a short circuit accross the zone in question,that is causing the fault.
To test for a short cct measure the voltage on the zone it...
What do you need to be qualified to, to issue an EIC for building control.as i understand you need 2391/2381 and i suppose need to be registered with your local building control. ?:|
Any one shed light on this?