I had a similar problem with an AEG oven (see earlier posts). I tested everything and could find no faults with the oven. Eventually I simply replaced the heating element and it has never tripped again. Not difficult and not expensive.
Cable tray/trunking is normal. There are a number of proprietary support systems for this using big feet that spread the load over the roof membrane and lift the trunking off the roof to allow free flow of water underneath. I would suggest putting a 300 x 300 conc. slab under the feet if resting...
Problem overcome. I changed the heating element, although the old one's insulation tested absolutely fine both hot or cold and so did all the rest of the appliance and its supply wiring. The power board, which looks as if it has enough computing power to run a space shuttle, just did not seem to...
Thanks Andy. Still don't understand how it can happen. Could turning it off cause a surge that just breaches the insulation and causes a current leakage to earth perhaps? Could there be capacitance between the element and its metal casing causing that? Anyway, I will buy an element.
Hi, my AEG BP3003001M wall oven, six years old, has started to trip the rcd every time it is turned off, but only when the upper element is hot. I have checked the terminal connections at the back and tightened them up, but this has not cured the problem. I am loth to replace the element on the...