Recent content by IanN

Definitely should be a small 2 pin jumper to enable the on board battery, are you sure it wasn’t in the bag with other supplied bits and pieces? They’re only small an easily missed! I only asked about the number of cores in the sounder cable as you could have wired the strobe separately but as...

jp 2 & 3 should be fine as per the photo, obviously the battery link needs to be made before fitting the covers was the sounder cable only a 4 core?

Looks to me like the black wire is the tamper return so it would go to C red is the 12v positive so it would go to A Yellow is hold off neg which would go to D blue is the siren trigger (also linked to the strobe input) B to trigger the siren, S to trigger the strobe. From the photo it only...

When you log in to your Pyronix cloud account and click on notifications you can select which notifications you want to receive - arm / disarm / alarms etc. and you’ll receive notifications for those events on your phone. I’m not sure about text messages or emails though

It’s a while since I programmed mine but from what I recall no, the pyronixcloud.com account is separate from what you enter into the panel under the communications option. The password you enter into the panel is for the procontrol app password. My pyronixcloud.com account consists of my email...

Have you tried the reset password option for Pyronix cloud? The app username / password and pyronix cloud are separate accounts - my passwords for the two are different.

Cheers for the replies Sidney & Murdoch 

Hi from a first time poster! I’m going to be needing electrical work doing ahead of a new kitchen being fitted. It will involve adding a new circuit from an existing consumer unit for a cooker. The consumer unit has a spare 32 amp circuit breaker which will meet load requirements but as it is a...