Recent content by Mastbruch

One thing is, don't bother with all these online 2391 mock exams you see online as they're way off completely & don't resemble the actual 2391 exams one bit.

I done the level 2 & level 3 & although you'd think you'll only learn the basics on the level 2 you will be quite surprised when you're cutting in to cable tray, steel conduit, trunking etc making different sets etc terminating SWA learning & making off MICC cable as well, not as easy as you...

Evening all. Just a quick question hoping someone has recently done it. Got my level 3 2365 science exam coming up week after next & on the C&G website it says there are only 27 questions, surely there must be more then that. I understand its a written exam but just thought there...

Just see that, I wonder why the C&G 2392 is recognised yet the equivalent EAL is not.  

Is it electriciancourses4u

Going to have disagree with when you say college lecturers wouldnt have a clue if they turned up on site. Yes I am sure there will be some where they wont have a clue but There are 4 college tutors in my college and all 4 are electrican gold card holders who are in their 40's and 50's who work...

What CPS scheme have you signed up to Gary to allow you to carry out domestic work which will allow you to sign your work off? What city and guilds certificate do you have in testing you say level 3 which is either the 2394 or 2391 which some going for someone who had no experience in the field...

IMHO I think the OP is on a wind up & wouldnt at all be surprised he is a qualified electrician making a point about these short courses. May be wrong Just my opinion. 

Not sure how you roll Tony but I dont normally bill myself for doing work in my own house. I am trainee looking for advice so no I would never be working on other peoples houses for years to come until I am fully qualified.

Listen here fella. I have been polite as much as I can and came to this forum for advice, I have told you everything what I have done, I asked at the start about continuity and IR, I then pulled the bulbs out again and checked the terminations of which a couple were loose and becuase of the...

I am not sure then Andy, I already done an IR before fitting the bulbs and tested for continuity and polarity again any other suggestions? 

Just basically tightening everything back up and making sure terminations were right. Do you recommend another IR test  

In the thread I said about buying cheap LAP Downlights from SF, We'll after closing inspection the neutrals which were already connected in the connector box's were not terminated properly & had a sleeve over them & it wasn't until I removed the sleeve and bingo.

All sorted now cheers for the replies

@Andy I tested at the CU for the IR where I tested LE, NE, LN and after this test I then linked the line & earth where I tested first at the socket between the SL/CPC then my R1 and R2 at the last light. @Ardet because they are cheapy LAP Downlights from Screwfix the terminal box was so...