Phil.cc

I've tried removing each wire one by one from the loop box, the red one switches off the main PCB altogether, disabling the black wires...

How do I link it out? Here's the wiring diagram of the control panel.

A senior moment Andy :( So, how do I bypass it if there's a faulty wire to the loop as nothing I've disconnected so far works?

Ooops! sorry. :( Anyway, the black box that CAME know nothing about is actually made by CAME, I disconnected one wire at a time, that...

I think I've hit on something, that black box in my picture turns out to be an after market loop detector, the sensitivity can be set...

Agreed, it's not the cleanest wiring job, I didn't put it in, but it has worked for nearly twenty years.

The wiring info CAME sent has all the connector blocks but doesn't show what wiring goes anywhere, also, my system has a seperate reset...

The PCB board is ZA3, CAME just sent the setup.

Excessive is the right word, I haven't changed a motor before but I put in the new one in around an hour, the guy charges £38 per hour...

I've had a quick look at the setup they sent and basically it's wiring Schematics, as the wiring hasn't changed, I think it's something...

I've just had a message from CAME, they want the PCB number and motor type, that said they would send a setup, if that didn't work, I...

What gets me is the established gate company's owner came to check out the fault, was here for 10 mins, told me that the right hand...

Well....the new motor, the one that gate guy said had failed and the one that he disconnected the wire from the connector to supposably...

I had that a few years ago with an electricuted fly, it blew a connection on the board but I soldered a wire across and all was well...

I've just had a reply from CAME:- "Sorry to hear your having issues although you seem to have a solution. I’d fit your new motor and...