poni's latest activity

Agree , try the above first,

check your supply voltage. check all contacts etc. bad connection and you'll get similar to running without a phase try turning the...

no socket so no RCD

can you not do the same with 2.5mm as long as it feeds only one single or one twin socket?

Cut plug off fridge freezer and connect to MCB / SFCU dedicated circuit

welcome to the mad house

you are right about the more info needed as for the number of cables at any one point, the only time it really matters is when its two...

As above. The downstairs switch that is supposed to operate the landing light should have 3 wires connected to it So if it was just the...

the two issues should be completely separate. If the PIR swop failed, it's either wired wrong, of there's possibly a manual override...

Or, if anyone has been following my ,'heated debate' on another site, use two intermediates 😉. I have had some nonce telling ME that I...

Labelled up your picture for clarity So switched live and live to other fitting connected to live on fitting then the neutral and earth...

4. The starter is not wired correctly

it could be the 1. coil in the contactor 2. the hold on contacts 3. the stop button stuck in or broken,

So you are going to cut the plug off and joint it into the cooker circuit? Will it have circuit protection? Where is this joint box...

I need to break into a cooker supply to take power for the extractor hood and a disconnected double socket - what’s a decent junction...