poni's latest activity

I was not asking if you knew the difference between the two , but that it would make a difference to the size of cable you would need,

As previously stated; no one can answer your original question on the basis of information provided at this point. A competent...

Trying to pull another cable through the same conduit will be far harder than replacing with the 10mm - use the existing cable to pull...

As people have said there are too many variables to be able to give a full definitive answer. With the distance involved and the...

You need to exercise caution when using LEDs and rotating equipment.

then leave him to do his job , as you will need a completion certificate to hand into the local council , and not just a EICR ,

are you just going to keep asking until you get the answer you want or are you going to listen and get a competent electrician to look...

"I have a decent idea of what I'm doing", no you don't. I don't need to do any calculations my experience tells me the 6.0mm² submain is...

I am interested in where the earth rod is, and how it was tested and why you think you need one, if you have exported the earth from the...

I'd be inclined to give voltage drop a bit more consideration. There's a good reason why BS7671 specifies maximum percentages and all of...

Recorded result for Zs will be on the test cert. PFC will also be recorded there and should be sufficient for this application...

this job is not guess work there is a lot going on in the background, I would not try and frame up a barn by reading a few books and...

I can't get my 50 years knowledge across in a few short post's you need more experience to do a job like this, this is not a DIYer job?

50 years an electrician

I do like your tag name "Shocker", what's your day job?