ProDave's latest activity

Probably every kitchen and bathroom fitter doing electrics and a lot of small builders.

I thought you were planning to move an existing socket up the wall but in much the same place, which would mean jointing 2 cables in...

@kerching is asking what type of box are you going to house the wago's in and where? Why not leave the existing socket where it is and...

Anyone care to precis what they say to save me an hour of my life?

I fitted my own complete MVHR system when building my new self build house a couple of years ago. I was able to borrow the anemometer...

So you spent many many £000's on buying a house including due dilligence and getting an eicr done, but have decided not so spend a few...

Welcome to Talk Electrician Forum. If you are NOT an electrician / trainee / apprentice, this part of the forum (Electrician Talk Forum)...

And 1.5kW in a towel rail it would be glowing red. They are normally between 200w and 400w

One house I previously lived in had such a switch that was faulty. After reporting it twice and having an engineer come and look twice...

Get the Energy supplier to swap it for a single rate meter, which will probably be a smart meter, that will get rid of the timeswitch...

Thanks for letting us know. Your previous fan had an over tun timer so it would stay on for a few minutes after you turn the light off...

Convention is grey= neutral, brown= permanent live and black = switched L, but there are variations so you would normally check to...

I can't imagine what "appliances" you are thinking of that cannot be unplugged or switched off at an FCU?

And to trip an MCB it is just as likely to be a L-E short, which is much more likely with a nail through a cable.

And if it goes instantly with a loud bang, rather than after a number of seconds, you can assume its kicking out on the mag, for a B32...