ProDave's latest activity
Help Support Talk Electrician Forum:
-
ProDave replied to the thread Scottish Rentals require a current satisfactory EICR..........Until the day the tape runs out of stick, or the nosey real finger presses just a little harder, or peels the tape off. My point is why... -
ProDave replied to the thread Assistance with a faulty Brook Motors manual starter switch for Phase 1 5Hp motor for grain milling machine.I would try it again with the cover off, and fingers out to see that happens. But first, if you can see the overload device protecting...
-
ProDave replied to the thread Assistance with a faulty Brook Motors manual starter switch for Phase 1 5Hp motor for grain milling machine.So that is 300 ohms, so that ought to be about right. Is there anything mechanically stopping it holding?
-
ProDave replied to the thread Assistance with a faulty Brook Motors manual starter switch for Phase 1 5Hp motor for grain milling machine.Try with the meter on one of the OHMS ranges. the range you are trying is for measuring the forward volt drop of a diode and it's not...
-
ProDave replied to the thread Assistance with a faulty Brook Motors manual starter switch for Phase 1 5Hp motor for grain milling machine.My bad. I saw "Electrolytic" at the top and assumed it was a normal, polarised electrolytic. like 99.99% of them are. That is the...
-
ProDave replied to the thread Assistance with a faulty Brook Motors manual starter switch for Phase 1 5Hp motor for grain milling machine.The blue capacitor is wrong, it should be non polarised like the silver one. but that won't be why it is not holding on. the hold on...