Richard-the-Ninth's latest activity
Help Support Talk Electrician Forum:
-
Richard-the-Ninth replied to the thread Old 2 Gang Light Switch to New 2 Gang Light Switch.Your old switch is 2 switches side by side. One switch has 3 terminals and is called a 2 way switch. The other switch has 4 terminals... -
If you think you will struggle with 3 x 2.5s then get an MK socket with built in Wagos…..they’re expensive BUT will do the job Never...
-
Richard-the-Ninth replied to the thread LED Batten light.Tricky6666, the only power supply I found on Amazon for those specs cost £13 and may or may not work, you can get a complete light for...
-
Richard-the-Ninth reacted to Murdoch's post in the thread Extractor fan install is noifiable, plus more!! with
Like.
And keep the window shut in the autumn, winter and spring to keep cooler moist air out This is rarely mentioned, and often people say... -
Richard-the-Ninth replied to the thread Mft calibration prices.Gentlemen, by all means you do not have to agree with each other, but do "play nicely"
-
Richard-the-Ninth replied to the thread Junction Box Recommendation.Gentlemen, by all means you do not have to agree with each other, but do "play nicely"
-
Richard-the-Ninth reacted to DPG's post in the thread Installed ferrite cores onto the live and neutral cables making a buzzing noise? with Like.
I would get checked out by a doctor. You may have an underlying condition. I doubt very much it is caused by your electricity meter...
-
Richard-the-Ninth replied to the thread Channel 5 - 13 things they don’t want us to know about Smart meters.I watched it +1 (didn't see this thread before then) It was journalism at its most dull. Stretching out things that everyone (should)...
-
Richard-the-Ninth replied to the thread Extractor fan install is noifiable, plus more!!.I guess really you could say the whole thing sucks.:ROFLMAO: Useless fact: You can have any size extractor fan in a bathroom, but it...
-
Richard-the-Ninth replied to the thread hello.Hello and welcome to the forum, why not say something about yourself? (Electrician, DIY etc)
-
Richard-the-Ninth replied to the thread Greetings from a mere mortal.Welcome
-
Richard-the-Ninth replied to the thread HI.A belated welcome
-
Richard-the-Ninth replied to the thread Brother E550W heat shrink tubing.I am told that for a 2.5 cable you need Brother 17.7mm tape But you will need a mortgage as its £51 for 3 rolls :eek: or you can try...
-
Richard-the-Ninth replied to the thread Powering 19v DC motor..Good luck with that one. If the battery and charger are still working and the tool failed (Drill, grinder, saw etc) will they not just...
-
Richard-the-Ninth replied to the thread Brother E550W heat shrink tubing.I would say that using printable heat shrink sleeving is the way to go. I wouldn't bother with covering it with transparent sleeving. I...
-
