SPECIAL LOCATION's latest activity

Lots of Holidays packed in so tight, I hope everyone has a safe and happy Holidays!

Looks like beans on toast at first glance.. I cannot see how having the headphone socket in or out or half way in could be the cause...

Just to add a bit more info on your LED's glowing problem.. (1) Traditional filament lamps require higher currents for them to...

Erm.. as you suggest.. up a stepladder, connecting a ceiling light, need to reach down for something then back up to the ceiling...

It strikes me that contactless switch will prove to be a PIA. Every time your hand passes the side of your head the light goes off...

IMHO this is over engineering a problem that does NOT exist.... e.g. the advertising bumf says "With a wide range of 230degrees our...

Just thought I'd add these couple of photos after a revisit earlier this week.... This is the water that came out of that flexi duct...

A plug in socket testers cannot prove ring continuity.. You need a low ohms continuity tester to the measure the electrical resistance...

With the power off you need to confirm continuity between the two Lives, the two Neutrals and the two Earths.. If they all have good...

Agreed. Many years ago some cooker manufactures instructions used to state do not connect this item via an RCD.. Which I understood to...

So the spec for that cooker says 35amp and to trip a 40A breaker you would at least 60 - 70A as a minimum and it would probably take a...

Reality is that google cannot search every product listing on every potential suppliers product catalogue.. And even when it is able to...

That Screwfix offering of the Philips pygmy lamp has been fitted. It is perfect for my purposes. Many thanks. My only question is why my...

You cannot safely just add additional sockets onto an existing circuit without knowing what type of circuit it is.... If its a radial...

Is the circuit a ring or radial? If a ring, have you confirmed that the existing socket it part of the ring and not already a spur?