Tim Howard's latest activity
Help Support Talk Electrician Forum:
-
Tim Howard reacted to UNG's post in the thread External walk in freezer issue help compressor with
Like.
Had something similar to this about 30 years ago a main contractor was delaying payment and we decided to send the usual pay now before... -
Tim Howard reacted to binky's post in the thread External walk in freezer issue help compressor with Like.
General rule if thumb, if someone else has interfered with your work, then any evidence has been destroyed, so no chance of winning a...
-
Tim Howard reacted to Gtown's post in the thread External walk in freezer issue help compressor with Like.
Thank you again for your time and knowledge it's really appreciated
-
Tim Howard reacted to Gtown's post in the thread External walk in freezer issue help compressor with Like.
Thank you for taking the time to message back to me and for the detailed response it's very educational and appreciated, I was told it...
-
Tim Howard reacted to binky's post in the thread Best way to find a short circuit between L and N? I.e a tripping MCB. with Like.
it's also fair to say a L-N short is unlikely, as the CPC is bare copper for a good reason. Ergo, any LN fault is more likely to be an...
-
Tim Howard replied to the thread Di-Log tester.You need a micro-SD card. You put the firmware on it, stick it in the tester, turn it on, wait until it turns off, remove it, and off...
-
Tim Howard replied to the thread Di-Log tester.@Phoenix - firmware 9.0.0 for X1 allegedly sorts out the auto-start of loop tests.
-
Tim Howard reacted to UNG's post in the thread Best way to find a short circuit between L and N? I.e a tripping MCB. with Like.
And that is where you divide and conquer rather than just start randomly taking the circuit apart The main faultfinding technique that I...
-
Tim Howard replied to the thread Best way to find a short circuit between L and N? I.e a tripping MCB..As mentioned above a clue can be whether a it’s an instant loud trip (magnetic mechanism) or takes a bit longer (thermal trip) If you...
-
Tim Howard reacted to ProDave's post in the thread Best way to find a short circuit between L and N? I.e a tripping MCB. with Like.
For a L-N short it in not an insulation tester you need but a low ohms tester, same as you use for instance for measuring continuity on...
-
sounds like a big enough place that no matter what you generate, it will be used. so rather than focusing only on the pumps & trying to...
-
The chemicals are checked in the morning and afternoon for CL, PH, ALK, and Hardness, but the pool remains fairly constant with a few...