UNG's latest activity

Difficult to tell from the pictures whether the lamps are removeable, are there any labels or part numbers on the fiitings

What you need is hands on experience with experienced sparks. A year ago it may have been straightforward getting some paid experience...

would you expect a double socket on a 16A radial to automatically have 20A available? Its not a 13A socket, it's a 13A maximum socket...

Now your being silly, my radial/radials power circuits are designed for general purpose whether it be 16 or 20A they are not unlimited...

Had the DNO out to a service head issue a few years ago and got to talking about earthing and he mentioned a job he got called out to by...

This debate clearly one that has two sides on the craft principles I was taught the best part of 5 decades ago I would go along with...

I had a similar problem to solve with an 18 gang MK grid switch about 5 years ago, the cost of completely replacing that for a couple of...

No. Absolutely not. Lurking is waiting somewhere in a position not seen. I was hardly invisible was I?😂 Was good to see you though. I...

Does the A J Bell Stadium back in October at the EV and Solar show count as lurking?

I would say get a local spark in as some of your knowledge and logic don’t add up

Very unlikely they would not be able to do it! An electrician with proper test would have identified the wires and confirmed if the...

The whole explanation is a confusing mix The OP does state 2 x 40A RCBO's for the showers I would agree, I'm not sure what the OP is...

Had one a while ago on a dual RCD CU and the fault was not on the side of board where the RCD was tripping. The strange bit was the RCD...

Looking at the pictures of the devastation surrounding the consumer units and then seeing the pictures of the remains of the internals...

Surely this post is a wind up? Get an EICR done before you replace the fuse. You might want to get the gas tested as well.