UNG's latest activity

With that comment I doubt you have ever seen a British Standard test finger On a recent course I did the tutor did not even know they...

Until the day the tape runs out of stick, or the nosey real finger presses just a little harder, or peels the tape off. My point is why...

“That tape is all that stops someone putting a finger in and onto the busbar.“ If it stops a finger then it stops a test finger.

What test equipment are you using for the continuity test

Really it does narrow it down a bit then, I have quite a few bits of test kit that will indicate a piece of equipment is possibly live...

G99 is for export limited larger arrays. You need to make an application for such an array to the DNO prior to installation. So do that...

It only takes a few quick tests to find out whether your MFT is affected by RCD / RCBO uplift and I have only seen 1 or 2 that do pick...

A bit of reading https://professional-electrician.com/features/the-end-of-uplift/

Self employed doing electrics for over 10 years...???? How have you provided Part P compliance notifications for rewires? What...

These are very valid points that seened to be overlooked during training these days, back in my days at college hours were spent on...

Lets assume you have spent mega-bucks and now have a 100% accurate meter that gives you earth leakage readings around the tails to two...

Given you are checking earth leakage on a live installation it is possible that earth leakage could fluctuate depending on the...

What ECS card are you hoping to get as only having the 18th edition will severely limit what you can apply for at the moment. Reading...

How have you established that the fan is electrically live with the isolator off in the off position

If nothing else, this thread has shown massive inconsistencies. Those that say it is fine, when it is not, and those that say it needs...