Tenby CU - mix and match

Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 5, 2014
Messages
8,669
Reaction score
1,286
Location
Woking
OK all, I've got my tin hat firmly on for this :)

Customer has a Tenby CU and the "lever" on the main switch is damaged - so before it snaps off they would like it replaced so the thorny issue of mix and match rears its ugly head.

Its the main switch - so 3rd party switch or one from an internet based vendor?

Thoughts
 
Some would say that a temp mis match can be installed until a correct version is sourced, others would say if temp fits then leave it, elitists will say don’t touch until correct one is sourced!!!!

Pick your category 😂
 
OK all, I've got my tin hat firmly on for this :)

Customer has a Tenby CU and the "lever" on the main switch is damaged - so before it snaps off they would like it replaced so the thorny issue of mix and match rears its ugly head.

Its the main switch - so 3rd party switch or one from an internet based vendor?

Thoughts
Someone on here may have one 😇
I can have a look in the morning....pretty certain Tenby got taken over by Legrand so it may be a Legrand one
 
Love the buzbar :)
Taken out 'as installed' it's yours if its useful...iirc (and I often don't) it was DIY installed in a loft doing next to naff all and hadn't been doing it for very long..it's been sitting in my store for a good 15 years..
 
Top