Search results

Guys thanks for all the replys , but I went to the customers house , today , it's about 30miles away , so could only get there today , and took all my testing gear with me , the owner of the house told me they had blown again , turns out the trip had gone off ,the lamps are all working fine ...

No there's no water , the lamp don't seem to be black or ruptured, the only damage seems by the end where the pin is the ceramic looks broken

The drive is long one points to front/middle other points to end , have checked voyage when lights pull in both at 237 to 240 the pins seem tight when placing the lamps into fitting they work fine for about 1 week then blow The fittings are brand new , seems weird that they could both be faulty...

G.E lamps there only on for a few mins , to light up a driveway area when the car drive by . Tried cheap lamps first .then bought these from edmondson off there recommendation . But same problem . Might email the maker of the light to see of common problem

Hi guys yes voltages same at both fittings , been wearing gloves to put lamps in , the sensor have nothing linked to the lights all they do is pull the coil in on contactor , this is doing my head in , I am going to down size the lights for time being to see if that makes a difference

hi i have put up 2x 1000w halogen flood lights that run off a wireless sensor,the sensor only pulls in the contactor that power both lights , when the sensor is triggered the lights come on for no more than 4/5 mins , i have changed the lamps for cheap to branded type but still have same...