Search results

Asked my assessor about this very situation and was told that its dangerous C2 to leave so easiest solution without fault finding or rewiring is to put the lights onto 1 circuit. No shared neutral therefore safe. Safety first has always got to be the key.

I'm in the trade and find this forum the best for getting answers to problems and getting advice. I personally dont tend to jump on the "am I paying too much" type of questions as most of the time you only get half the information so you can't make a reasonable call. Everything goes quiet at...

Well it's confirmed with the release of Amd3 today that Amd4 will be released. This is new as there has never been 4 ammendments before. So possibly no new book till 2027. Link below for details. AMD 4 Info

Yes it was tucked behind the din rail, CEF Leyland stock them. Better price than Fusebox just no 25a option yet.

OK so found the issue. Tested circuits all fine in regards of ir tests. Rcbo ramp test 24ma so that was fine. Issue only happens when a light anywhere is turned on so it has to be as suggested a n-e fault. Replaced rcbo as only other variable in the system. Now works fine. Examined original...

Will let you know. It's a new board so all same manufacturer. Picking up new rcbo this morning and heading back there.

But no current flow. Dp isolator is off as no immersion connected yet.

I thought induction, but there is no load on the immersion yet. It goes from board to time clock then down to 20a dp isolator all new. Isolator is off as just coiled flex waiting for plumber to do his thing. It's just weird.

But why only happening when the other circuit is on via the time clock and no electrical direct connection between the 2 ??????🤷‍♂️🤯🤔 Doing my tree in lol

Evening peeps. How's everyone enjoying British summer ??? So apart from me scratching my head and declaring I'm going mad, has anyone else had this....... New board all rcbos. Installed new 2 new circuits for new immersion tank. 1 for boost run on a push button timer switch, 1 for night time...

Final outcome. 2 thermostats one for bedrooms one for living areas. Im cutting fast fix single box behind panel, running 2.5 from each panel back to immersion cupboard. Joining 2.5 twin and earth with 20a (I call them click plug and sockets) to panel heater flex. Blank plate with side flex entry...

I know. Like I said it's probably just me over thinking it. And me thinking I don't want a plug or a spur unit on my ceiling ! Lol

I thought there was something. Glad it's not just me 👍

Yeah I replaced the old consumer unit with new rcbo and put smoke detectors in but he wouldn't go for a rewire as out of the budget. It will be one or 2 new circuits for the heaters. I just don't like the look of a spur unit in the ceiling next to the panel. If it were my house I'd be like wtaf...

Apparently he's bought thermostats for 2 of them ???????? I hate it when customers buy products they haven't a clue about. I don't know if these are wireless, Bluetooth, magic or what !!

Customer has a bungalow. He's had it plastered and decorated. He was going to have a heat pump installed but something has happened and that isn't happening now. He wants to put infra red panel heaters on the ceilings of each room. 700w panels. Each come flexed up. How can I connect them...

I use M5 / M6 to tap RSJ to bond to. Have used a drill before, but you got to go very careful and slow and reverse alot and add lots of cutting lube. Always willing to provide feedback on any samples that may become available.

Anyone spot the difference ? Nope me neither 🤣🤣

Customer rings.... My bathroom power keeps tripping out. I think its the fan. Attends site. 40a wylex plug in mcb off. That's for your shower. Yes the fan is connected to the shower. Hmmm. Checks mcb seems dodgy. Grabs one from spares box. Powers on 15seconds trips. Hmmm. Removes 45a...