Search results

Sounds like he's in the 1st year of 6th form..... maybe???

Even 2 pages is a lot for a CV.... anything more and it won't be read, it's meant to just show the highlights,,,, not be War an Peace

I've been somewhere where all the accessories had M3.5 security Torx screws.... that was bad enough!

As @boltonsparky says..... get your installer to install an EV charge point with load curtailment built in... with a 60A main fuse the limit should be set to 55A. But this should be ascertained when they do their site survey... if you're just making an online enquiry with them, through something...

I thought about doing the old version of this (2400) after doing my 2391,, but I'd had enough by then.....

Thats on the online PRS registration form 

Hi Elliot, welcome to the forum,,, you'll find that most of us on here don't give our advice/knowledge on a Quid Pro Quo basis,,, if someone needs help/advice then we give it freely - except, we won't do someone's homework, but we will help them out by trying to point them in the right...

I don't know, but it was in the T & C's  of being registered on their PRS scheme when I joined it

It would be nice if they also included WHY? if it's bathroom circuits and there's no supplementary bonding then a C2 is fair,,,, but I doubt that's the case given the number of circuits

I'd agree with the above, but bathroom circuits now need RCD protection. So that will include the lighting and possibly the heater, but not the other lighting circuit and smokes. The code that this will receive depends on wether there is adequate supplementary bonding.... If we use the ESC best...

It was when I did it in November..... you also had to have Flash enabled 🙄

scaled up head and/or hose?

Maybe see if you can get one with a ferrite core to reduce any EMI

I'm sorry to say that it's obvious by your posts that you are massively out of your depth... IMHO you should stop right now before you hurt yourself, someone else or just make matters worse... this isn't a go at you BTW,,,, there are loads of things that I can't do, and the same could be said...

As for how long the antibodies last.... I had Covid back in June,,, I was asked to give a plasma donation before Christmas... last week I had a letter from the Blood donation service saying that my antibody levels weren't recordable ,,, so while the'd like me to give blood again, they won't be...

Here's the settings from mine if it helps

I've done this exact thing recently... (only the 1 RKP though) I'll have a look at Wintex and get a photo of the settings for you

Why not save a lot of hassle and work and use Quinetic switches & a receiver... get whatever grid frames and plates to suit the backbox

It's not going to be anywhere as simple as that I'm afraid... It'll very much depend on the protective devices for the circuit..... IMHO this work is far from DIY, you need to get a local electrician to have a look at it and quote you for the job

The long and the short of it is that BS7288 devices no longer comply with BS7671 as the do not offer additional protection... the only other option is to use BS61008 and BS61009 devices... if you use an appropriate enclosure and wiring method then you could put one of these outside a bathroom to...