Search results

thanks for clarifying binky i was concerned there was a problem the LAN data logger

hi binky is it normal then solis using the mwh and gwh units instead of kwh or do i need to change or setup something

Top-right hand side shows as Mwh

On your app does it show import as Mwh Gwh or Kwh same for export as mine shows Mwh and Gwh

and how do you find the wifi connection to it sending information out quick or not

John is yours Wifi data logger or lan logger

Device information Type Embedded Ethernet SN -----------039 Firmware version ME-121001-V1.0.6(202002111118) Current time（Time zone） Sun Mar 26 2023 22:55:37 GMT+0100 (British Summer Time) do you know if this is upto date firmware on the data logger

OK thank binky another query the plant type on the app is storage or residential as the solis is ac coupled battery only not solar pv aswell the solar is enphase micro inverters

hi phil tell us a bit about yoursekf are you an electrician good to see you here

so does all the solis app readings show gwh and mwh as the consumption values then

Hi binky who is confusious

The power rate setting I'm. Not sure is that what the unit will. Supply. To the house from export And the time of use stop or run not sure what that would be Plus charge times I gather that is charging the batteries when they get low charge from grid not export, when our microinverters are...

The solar is the same cu as my inverter is connected and the surge protection see picture attached will this make a difference

Can someone help me with a few settings or the settings list of what they should be please

choose pv

just a quick suggestion on mine i have ct clamps settings as pv not grid if i select grid it stops coms to meter but PV setting allows meter to comms

The lan is better at updating the power usage etc but just an unusual thing to have had Gwh not Kwh

Another question why would my data of export and import be showing as Gwh instead of Kwh I replaced the solis data logger today from Wifi unit to a LAN connected unit and the data seems to be showing odd readings any ideas

So I'm guessing the solis clamp looks like it's on the consumer unit busbar between the circuit breakers of micro inverters and the consumer unit main switch

So do I not need the second ct clamp direct from ac coupled inverter then