Search results

Fogstar rack batteries are just a little cheaper. ;) They say "Our racks are built for the UK Climate. They heat themselves when a temperature of <5°c is detected, enabling the user to charge our racks in temperatures of -20C." Ideal for the cold garage in UK winter.

My clock is set to Friday 28/04/2023 11:16:50 (UTC+01:00) Note the plus one hour to get correct UK time now. There have been several app updates in the last few weeks, at a guess I would say there is a difference now between the APP and your actual inverter time setting. Remember to use the...

Not sure if this is of any help to either of you but here is the gist of an email I saw on another forum from Pylontech in regard to Solis inverter use. When you set the inverter to Pylontech it leaves the voltage range at 42-60v even though the operational range of the battery is 45v to 54v...

Take a look here, its a starter for you anyway. https://powerforum.co.za/topic/8294-pylontech-battery-mixing-alarm/

If you look on youtube there are instances of extending the CT by up to 40mtr using cat 6 cable. I suggest you keep the length as short as possible and use all pairs. Pluginsolar even sell the CT with suggestions to extend it...

Its a bit late for that Joules, I'm guessing you skipped the thread to post at the end. I ordered a Fogstar rack battery which was delivered first few days of March, added an inverter and up & running by 21st March. It was fully charged by Noon today, the house is running on it now. I have 2...

Well maybe its different for wifi or gprs to LAN. Have you tried downloading the Solis cloud operation manual to check there?

Is the solis cloud app up and running with your data logger listed by serial number in the app ? Is the logger listed as online? If so click on the serial number and it will give you the signal quality graph. I am assuming the same graph of quality appears for both LAN and wifi sticks.

Go device-datalogger serial number and see of the reported signal is dropping out during the day.

Working fine here all day.

You need to fill in a request for remote access. https://solis-service.solisinverters.com/support/solutions/articles/44002373796-inverter-remote-control-application?

https://en.wikipedia.org/wiki/Confucius

I would just put 1 CT as close to the mains in tails as I could and the other on the PV inverters mains supply.

Mine has a meter select tab where i chose single phase meter. Also a separate CT install tab with a choice of grid or PV

No idea, but your one up on me, I fitted a LAN logger yesterday and it refuses to play nice, it seems to think its wifi but offline.

Yes its probably not actually on the copper busbar but anywhere from that point following the isolator up to the cu above would do.

Look again, it has two clamps, one direct from the Solis and the other via the meter. Both are used as are mine.

This works fine, copied from another forum.

Thats how mine is, if it helps.

I have this inverter, from another forum Part of the Pylontech CANBus protocol is that the 8 character string "PYLON " (i.e. PYLON and 3 spaces) should be sent as CANBus message 0x35E. The Solis will fail with the battery name error if the Solis is set to PYLONLV battery type and it does not...