Search results

I have just completed the work as per my post #18 and all works fine after a little tweaking of the fan timer.     I have labelled everything up before boxing off the wiring so the next bloke is not too confused - hopefully I'll be living here for a while yet though!). Many thanks to you guys...

The topic has seemed to go off at a tangent. Regarding wiring the switched FCU: I have spoken to an electrician today who advises me to leave the additional Live terminals (entering the 3 amp fuse) free from wiring and just connect the feed SW to L1, PL to L2, N to N as normal.   I therefore...

Thankyou steptoe and Evans Electric, apologies for the delay in responding but many thanks for your valuable time. I was happy with steptoe's advice as that was my planned way ahead however Evans Electric has thrown a spanner in the works with the need to "rejig the wiring" to isolate the SL.  ...

Are you saying that the incoming switched live (from the lighting junction box) should connect to the Live (in) in the fused area, then I loop a short wire from the Live (out) in the fuse area into the L1 (in)?   I was assuming it was the permanent live that needed to go through the 3 amp fuse.

It is labelled as a Click K6093 (BS EN 60669-1 10AX 250V) over the L1,L2 and N terminals with Click 047 (BS 6733 13A 250V) labelled over the fuse housing bit where the additional L in/out terminals are located. I've already replaced the 13 amp with a 3 amp fuse.

Good afternoon.   I'm new to forums generally and this is my first post here, so here goes ... As a fairly accomplished DIYer of some 4 houses todate I have a question relating to the wiring of a triple pole fused switch I have recently bought for isolating a shower extractor timer fan.    I...