Search results

Hi Dave, I've followed the complete length of cable as its visible in the cable harnesses across the ceiling and all looks intact with no joins. There is a couple of 90' bends so I'm not sure if that has damaged the armoured cable. As for the colours I'm going back there now so I will update as...

This is how it's connected outside. Hopefully sombody may know if it looks correct. The terminals on the left are from the armoured cable coming in and the ones on the right are going to the indoor aircon  blowers/units thanks.  The picture is too big to upload sorry

I'm reading the voltage with one of these multi meters. The voltage was read using the contact probed and not the clamp. Thanks

I'm not too sure about the ins and outs of the payments as I didn't have anything to do with that. I've just come to help him out and try to get this working and find out what's happened.  Could it be anything to do with how it's connected at the problem end? Like a bad earth or something? Thanks

He was paid in advance and never came back to finish the job. For example light fittings didn't get installed, ect

Hi Andy, there is power going into the cable at the start and it's a continuous cable with no joins, when disconnected at the aircon end it reads 36v yet at the start of the cable it reads 230/240v but when connected up there's nothing.

The problem is he's run off with the money and can't be contacted. I thought I would check first if anybody had ideas what to check and test for before we got another electrician out. Thanks

Hi I have been asked to look at an electrical fault for a friend of mine.  The fault is he's had an aircon system fitted by an electrician and is not working. There is power from the rcd to a junction box that connects the flex cable to an armoured cable that runs thru the building to the...