Search results

I tested it correctly then, tested between 1 (240v) and 3 (com) and got 1.3ohms on every ballast I tested, tested capacitors as well, all good, so only thing I'm left with is the igniter, however couldn't look at that tonight as the ladder I had was too big and couldn't fit behind the light

So this is me just getting a chance to look at these flood lights again, I checked the resistances of the ballasts and all are the same (working and non working) so question 1. How do I measure the resistance of the ballast? I went between each connection point on the ballast and got a very low...

Hi again everyone, I was asked to go look at floodlights at the driving range of the golf club up the road, 6 of 1000w Hp sodium floods, with external control gear. 2 of them are working, 4 aren't, tried a new lamp in each of them but nothing happened, opened up the control gear box and inside...

Commercial and industrial, flood lighting and led tube lighting for interiors of fishing boats

Hi guys, The company I work for are looking for a lighting supplier to buy direct from, we usually use wholesalers such as city electrical and newey but sometimes they don't come up with what we need for lighting, do you guys have any specific companies you would recommend? Cheers Bobby

It seems like they started to build a small outhouse for it and then gave up, 3 breeze block walls and roof spars but no sheeting on the roof, label in the motor said it was installed 2008 so Scottish rain and hellish weather for 7 years couldn't have been great for it haha

Sadly not marvo, it was that bad that components were falling off due to corrosion

Excellent thanks for the answer

Hello again everybody, I have a question as the title suggests about current transformers, I need to fit one to the irrigation pump I'm doing to step down the current for the protection relay. The main one I can find is a 50/5 CT and I was wondering, do they work in the form of a ratio or is it...

A roof on the bloody thing might help haha

Hi again everyone, after taking the control unit off and testing the motor, the motor is perfectly fine and the cause of the fault was really bad corrosion inside the control unit, thanks for all the advice, I'll post a photo of the finish item when I'm done and you can judge my work haha...

Nothing like an easy job

I'd very much like to take the motor off and have a look at to however as it's an after work job I don't have the time but if they are willing to wait then I'll do it, and if possible I'd like to shadow the engineer, I do the same with the commissioning engineer from MTU and 90% of the time he...

I received your emails thank you very much :) and I also got an email back from the company with an answer of, all we can do for you is send our engineer to look at it for a cost of £308+vat and then any parts and labour after that are charged separately, so I'm not sure even if I diagnosed...

I'm not entirely sure what the fault is, when power is applied to the unit nothing happens, but at the inverter is mounted on the pump I'm making a guess that since the front of the panel is not illuminating then it's incapable of doing anything, they said to me that it was running fine all last...

Looking at the other data plate it seems you're correct And that's you just looking at the photos I've put up, why couldn't they work that out?

I'm going up tonight to see if I can get anymore information from the whole thing, all I want from them is information as to whether this is a common fault and here's the part you need or that sound alike the whole controller is knacked and you need a new one, here's where to get it

That's what I'm trying to get from them, I've gave them photos of every data plate I can find on the thing and they say the still need more information about what pump it is, I don't know what else to tell them haha, yeah that's the pressure switch and that fault is that nothing happens, when...

Front of motor/control panel Whole Setup Motor data plate Hope this helps

The pictures I have are too big to post, any ideas as to how I can post them?