Search results

I would just use 42 strand copper cable, nothing to fancy for the stuff you'll be installing to be honest. And just bare in mind where the cable runs, not next to transformers or anything like that, just in case you pick up any interference. Multi room systems I would only ever recommend Sonos...

Thanks for your replys. Going back there tomorrow to sort it, just was interested to see what your views were. Cheers.

Hello. Just been looking at a job for a shop and noticed something that came to my attention. The ring main for the shop floor is run off a radial circuit from the CU. It runs in a single 2.5 t&e then into a 45amp cooker switch, so its easier to switch off at night (apparently), then into a...

Make sure you line up with the correct satellite, astra, 28.2E and i'm guessing from your location probably a 25 -26 degree of pitch from horizontal . Its made easier if you have a meter, bearing in mind the meter 'Robojin' is recommending will only give you signal strength and not quality and...

A masthead amplifier will not pass any signal unless it has its 12v power supply. This can normally be connected to any input on the masthead, so from any aerial point in the house the PSU will need to need to be plugged in. Hope that helps.

A masthead amplifier will not pass any signal unless it has its 12v power supply. This can normally be connected to any input on the masthead, so from any aerial point in the house the PSU will need to need to be plugged in. Hope that helps.

You'll only need a twin downlead if you are using a Freesat PVR.

Hello everyone. My name is Chris. Been in the electrical trade for 3 years, going to be setting up my own company soon so I thought it would be a good idea to join this forum to pick your brains from time to time. Anyway, Cheers for now.