Search results

You sir are an absolute legend massive thumbs up!!

Thanks sharpend, should this be done with boiler turned off at mains?

The black one?

Which ones are they Andy? The yellow and blue taps?

Hi guys, I just bled the radiators in my rented house and now the biasi Riva compact boiler has lost HW pressure, I've done some online research and can see a few answers but I would rather check with a pro before getting my landlord involved, I've attached images of the setup, what do I need to do?

So what would cause the code to be locked?

This is what texecom said; "This would not be the engineer code locked but most likely the codes have become crossed over or mixed up at some stage.  Locking the engineer code is a deliberate action in engineer programming options. We suggest defaulting the alarm panel back to factory settings...

I was hoping that might solve it but only if the engineers code isn't locked

So I'm assuming a "user" can access functions such as walkthrough etc and only "engineers" can access functions such as zone suites etc? If so that might indicate the panels locked because I just tried "configuring the keypad" like it advises in the instruction manual it came with which is...

Hmm, I tried resetting the factory settings by following code-prog-07 but when I dial in 07 it just chimes like it's an error, can I just reset it all and start again?

But it will let me do a walk test!

Update* all I can do with the panel is set and unset it, if I enter my user access code which I changed from 4321 to 1234 and press programming, it won't allow me to do anything, for example edit zones in part set suite 1

Hi chaps, today I fitted a new keypad to my veritas r8 system, I'm assuming because the main panel battery and mains was turned off for 24 hours the system has reset to factory.  The code to set the alarm has reverted to 4321 and I'm having an issue changing the set code. I've followed the...

All.done! Thanks for your advice 

No noise, so now I've done the process it chimes from the keypad whenever a zone is activated!

Ah so I don't need to press 5 after PROG just 51? Sorry I didn't read your reply properly thanks for your help!

Ok so I've got this far to try and add only zones 1/2/3 (which are front/back door and main lounge zones) to my part set suite 1 However if I press PART then I see this image (see attached) which doesn't match what I have programmed. The process I'm using is as per the manual...

Or is suite 1 downstairs and suite 2 upstairs?

Google says to do this;  "A Part Set Suite defines the zones that will be automatically included and excluded (omitted) when the system is part set. From the Programming Menu, press 5 ( followed by the suite number 1, 2, 3, or 4 (e.g. to program Part Set Suite 2, enter 5,2. The zones currently...

Hi guys, another query for my Veritas R8, I want to be able to programme the "part" setting so that the downstairs zones can be set when my wife's at home upstairs in bed etc, is this possible? When I press "part" now I get what you see in the picture, Thanks Ben