Search results

Hi thanks for email. Just like to say thanks to everyone for there help. I've sorted it 👍😊 it will go up and down on the hand held buttons (but not the one on the control box there's no power going to button??. ). I'm happy with the one down button working. How I got it working. I turned...

Thanks for the reply. Thanks Tony for the link. My gaffer knows a sparks and he said if i got the drawing he will come and have a look. I'll give you an update in a few days.

Morning i found this with a diagram of a neutral wire in a 3 phase system.

The contactor starts the motor. I set vdf to desired speed and I can hear coil power up. then use the up button and contactor kicks the motor in. And yes I thought about hooking up a small 12v battery and small switch to trigger solenoid to lower the ramp it's a bit messy but it will work just a...

To start none of us have got an idea but I was on a learning curve how ever small and simple to educated ppl in your field you couldn't nurture it jist cone with how long is my man's money he is just a chancer I never started this any one of you could of said we can't help you or give you step...

Then Tony should help you to learn more about motors. But he can't tell me hmmmmmmmmm. Why. I'm a diy  er and it must be my wallet. Well if Tony has got knowledge share it. 😊

Alright calm down tony it's Monday .  I'm not a complete fool what's the point of coming to a forum for help as a diy er if only to be told go away get a sparky. I can take nonfor an answer no problem. Your going to help me or not alot of it I don't understand but tbf mate I'm having a go and if...

I posted motor plate see above. I'll post copy of manual later after graft. All I can tell you is I don't use the vdf to control the speed I set the speed then use the up button to switch motor on I only used the speed controller with up button pressed to find the right volts for motor to kick...

Power:1.5KW Rated Current:8A Voltage:AC 220V 50HZ/60HZ Capacity:4.0KVA(1.5KW/2HP) Output Voltage Regulation Mode:PWM control

Hi Just a thought could I use a jumper on the 24v block white one to by pass buttons/ limits. To test. Would I do the same to the lower limit switch it could be stuck on thinking it is all the way down.  I can't read the drawing to well do you know how I could by pass the lower limit switch and...

That makes sence . But the down button must work as I put a test on 2 and 5 from solenoid and it comes from 0v to 24v when button is pressed.  I'm at a complete loss lol time to call in an expert I think

Solenoid  is fine I can lower the ramp with my 12 volt battery charger by touching the clips onto solenoid spade ends. It works fine.  I think it could be contactor and op is not using it to put any cars on it has to be sunk into garage floor and  fixed down and wired correctley . It is being...

Hi I've checked all outputs from converter and control box and none are above 220 it spikes on my meter to 250s. It's a very small converter and can't produce that amount. Gone back to N AND W together set the converter to 220v so coil gets constant 220v when buttons is pressed contactor makes...

Lol im not joining wires im just pointing out on diagram 380v and 220v N ,W join the same line and goto 24v. its just a part of the drawing i dont understsn lol. I think it ref to it can run on either 380 or 220.? Not sure. Could I i take black and blue from coil top left and cover them and...

HI thanks for your help, correct me if I'm wrong but it is my understanding. Inverter only gives out 220v max on 3 phases W V U 220v on each theres is no way 400v is going to control box coil. On invertor prog menu it will only adjust upto 220v max. Although on the wiring diagram it says 380v...

I did think of doing that but got a inverter 49 quid I'm not that good with this type of stuff. Inverter works great but for some reason it will not trigger the solenoid to lower the ramp. Everything else works. Limit switches etc. It would be a shame to replace it all and it works fine. Part...