Search results

Thanks for the responses. It's none of those though. Where the neutral screws in to the fitting, that has broken off. So there was no circuit. I've soldered it in place. I knew whatever the reason the fitting wasn't working I'd fix that... still don't know why the voltage goes up and down...

E27 'dimmable' LED

It's the second light of four... They are connected in a standard fashion, from 1 to 2 to 3 to 4. If there was a loose connection at 2, then 3 and 4 wouldn't work. But also, wouldn't the weird V reading affect the other 2 working lights in some way? It doesn't, they seem to be working fine...

Yeah, I'm gonna take the dimmer off and wago the wires together, and see what difference it makes. Thanks!

Hi, I'm having an issue with a light. Its a fitting that also has another 3 fittings on the dimmer switch. Basically, one of them isn't working. I changed the bulb and nothing. I tested the bulb, it is fine. So, I decide to take the fitting off and see if power is actually getting to it, and...

Of course not 🤣 However, the 2 rods which are 4ft are at least 10m apart... and I'm working on the premise that 2 is better than 1. What do I need and is it expensive?

Hi, You are quite right, but I think and hope this DIY section (which itself denotes a non-professional) of this forum is for numpties like me who are going to take matters in to our own hands regardless, and you professionals are willing to advise us numpties, as we're going to attempt it...

How do I figure out the zone of influence?

Thank you all so much!! Greatly appreciated!!

Hi, The armoured cable is earthed in the house, and is connected to the earth block in the shed. Then by doing this 👆, I have effectively connected the 2 rods together. The one the house has, and runs through the armoured cable etc... and this new one by the shed. That's ok, yes?

There's a 4mm armoured cable coming from a 32a RCBO from within the house. Goes into a CU in the shed for a 32a ring and 6a lights. The 2nd earth rod is simply going to be hammered in to the ground and strapped to the frame. I know an earth rod can support a TN system, but not sure how that...

Hi all, My electrical installantion here in Cyprus is TT. As some are aware I have a metal framed shed outside and I wired it up for lights and sockets etc... it's earthed by adding a strap to the frame.. However, I have been thinking about ramming an earth rod near by and strapping a thick...

Just a quick question, as I've got all you guys attention 😁 Just going through some of the stuff I jave here and noticed something, if you can shed some light on it for me. I have 2 dp rcbo's by 2 different manufacturers. One has the neutral to the right screw, the other has the neutral on the...

With regard to that... i always heard that the reason we have ring circuits is to save on copper.. I don't get it, unless I really dont understand radial circuits. My understanding is, from the breaker you run a line into the room connect a socket, continue to another socket and when you get to...

Oh! Well my house here has THREE CU's, 2 on the ground floor and one upstairs... I thought this was mad, as in the UK, no house I ever had, had more than 1, even if it was massive. So having three is a good thing?

Thank you guys, so much. Mind at ease!! I really appreciate all the replies!!

Hi, Let me start with the following info: 1. I live in Cyprus which has 230v 50hz system. 2. Cyprus uses UK style everything. The regs may be slightly different here, but by and large they follow the UK. They use ring circuits for sockets, loops for lighting and they are going to change soon...

Great idea! Thank you so much!

For the leakages I don't know. It wasn't me and yes, the solar panel installers used another tool with a display. I do not know what they do. However we had to go around the house turning everything off. They just said that the reading is 0.001 or something like that, could be 0.01. Either way...

There wasn't any instructions as its a light fitting I removed from elsewhere and had in my garage. It does have an earth terminal... i didnt even think of that, i think you're right 🤣 I suppose my cousin frightened me... the fitting is metal and the frame is metal... put a wooden board between...