auto fill test sheets

[Lee321]

need your feedback

can you check these out plz see if there is any errors

yes lots of limitation but works for the typical job.

does it print ok etc

have a play with entering a circuit and mcb type and rating see what happens

http://www.keepandshare.com/doc/view.php?id=1733111&da=y

 

[Apache]

Looks impressive. Did you make it?

 

[Lee321]

Looks impressive. Did you make it?

i downloaded it patch from the downloads

i just added the auto fill functionality

 

[a1]

Make sure it comes off of there and put back in OUR Downloads Area Please, Lostit.



Looks good Chap - Appears that the rn has changed only, since I last saw it.

Very Impressive, Mate.

 

[Lee321]

Make sure it comes off of there and put back in OUR Downloads Area Please, Lostit.

Looks good Chap - Appears that the rn has changed only, since I last saw it.

Very Impressive, Mate.

i've sent it for your approval jamie.

the changes since are when you select types and ratings the max zs will change to suit.

also the sheet now fits an A4 sheet much better.

and has the 5 selectable sheets that more closely match the majority of the protection devices as you suggested.

a note on each page reminds you which, but does not print out.

press print preview you'll see what i mean.

 

[SPECIAL LOCATION]

need your feedbackcan you check these out plz see if there is any errors

yes lots of limitation but works for the typical job.

does it print ok etc

have a play with entering a circuit and mcb type and rating see what happens

http://www.keepandshare.com/doc/view.php?id=1733111&da=y

Reference methods need changing for 17th..

No longer 1,2,3,4...

Now

A,B,C,D...

(Pg 261 onward BRB)

 

[Lee321]

Reference methods need changing for 17th..No longer 1,2,3,4...

Now

A,B,C,D...

(Pg 261 onward BRB)

ah yes technically. the key is provided so reference is correct?

 

[a1]

Well Done Lostit, Thanks.

Are you adding more drop downs to it?

Many Thanks,

Admin.

 

[Lee321]

i think as it is. is the best compromise

there are drop downs for:

circuit description

mcb type

mcb rating

all of the cells that auto fill are directly editable. i.e your lighting circuit has low insulation resistance but it has auto filled 200+ you can just click on the cell and enter your result.

same as if the auto fill cable size is incorrect then just click the cell and enter your size (the cpc will be auto)

 

[Bez]

Only thing I can spot is the ref. methods. They dont allow for insulation < or > 100mm.

Other than that, looks good

 

[Voltimax]

It was me and professional who made that test sheet template

 

[Lee321]

It was me and professional who made that test sheet template

superb work lads.

what do you think now with its functionality?

 

[Voltimax]

Well the version you have there is profs. The one I have already has functionality, but too much can be a bad thing.

 

[Nicky Tesla]

ive downloaded it but can't open it. My comp says it doesnot know what program to use to open it.

What program should i download to open this?

 

[Lurch]

MS Excel, or Excel reader, or OpenOffice, or other office suites that can open .xls files.