Built In Panic Buttons On Rkp (Accenta G4)

[kwano888]

Does this need to be programmed in the settings on RKP for it to work ?  

It's all connected in the main panel as per the instructions :

Sound

Comms

+13v

0v

Tamp x 2

... but pressing the two 'PA' buttons doesn't have any response.

Does it need to wired into the main 'PA' terminals for it work ? If so, how is this connected.

Can't seem to see anything in the manual.

Sorry, forgot to mention it's an LCD version remote keypad.

 

[SLIPSHOD & SLAPDASH]

I am 99% sure it needs programming. I will check later but Sir Richard the ninth will probably beat me to it.

 

[Sharpend]

If I'm reading it correctly here page 17 default settings the RKP PA is enabled by default

http://www.theelectricalcompany.co.uk/manuals/Optima_Intruder_Alarm_manual.pdf

 

[Richard-the-Ninth]

You read wrong.

by default the rkp PA is off.

Yes, its under "flags"  flag1 option 2

 

[kwano888]

You read wrong.

by default the rkp PA is off.

Yes, its under "flags"  flag1 option 2

Thank you Richard the ninth. Much appreciated for the super fast answer.

 

[SLIPSHOD & SLAPDASH]

Said he would beat me to it 

 

[Sharpend]

Yes I stand corrected, lesson read twice post once! :coat