C & G 2330 Level 2 - Unit 2 - 202 Mock Test Questions.

Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

welshwizard

Honorary Life Member
Supporting Member
Joined
Feb 12, 2008
Messages
1,653
Reaction score
-1
I typed these out by hand a short while ago - because my scanner was broken at the time - Anyway, Good Luck.

Exercise 1. Unit 2: Outcome2: Session 1

1/. Give a definition of current, in your own words.

2/. What is a free and what is a bonded electron?

3/. What is the quantity of electricity measured in?

4/. If 3 A flows in a circuit for 2 hours, what will be the charge?

5/. For a charge of 900 C and a current of 2 A, what will b the time in minutes?

6/. The time taken for a battery to charge is 4 hours, what will be the charge if a current of 4 A flows?

7/. How many electrons can inhabit the innermost shell of an atom and what label is attached to that shell?

8/. What is an ion?

9/. In what direction does conventional current flow?

10/. In which direction do electrons flow?

Exercise 2.1

1/. Give three effects of an electric current.

2/. Give two suitable examples of ach of the effects stated in (1).

3/. Give two examples of a cell.

4/. What is an electrolyte?

5/. Give two types of secondary cell.

6/. When would you use a thermocouple?

7/. What is a combination of cells called?

8/. What happens when current passes through an electrolyte?

Exercise 3.

1/. Define mass, force and weight, giving S.I Units for each.

2/. State the earths

 
5/. A motor has an efficiency of 78%. If the input power is 39 kW, what will be the output power available?

6/. If the output power of a generator is 250 kW and the efficiency is 83%. What is the require input power?

7/. If an object has a high centre of gravity, what could ensue?

8/. What is stable and unstable equilibrium?

9/. A force of 70 N is applied at a point 250 mm from the centre off a pulley. Calculate the torque applied.

10/. A pully has a radius of 0.225 m. A force of 2.5 kN is applied. What is the turning force being applied?

Exercise 4.

1/. A coil has an effective length of 14m. What will be the resistance of the coil if its area is 0.5 mm

 
HI thanks for the questions but is ther ea revision answer sheet too lol

 
Top