Dave4718
Junior Member
- Joined
- Feb 3, 2011
- Messages
- 24
- Reaction score
- 0
Hi, I have recently done my 2382 and am due to register with ELECSA for my part p. They say i need to complete two jobs one of which must be a consumer unit change. Mine is quite old so i have decided to do that. The problem i have is i have not done one during training. I dont have a problem doing it just have a few questions on the safe isolation.
a) How do i replace the tails when the fuse is sealed
B) I have a megger MFT1730 which tests do i need to carry out.
c) any advice on this would be greatly appriciated
a) How do i replace the tails when the fuse is sealed
B) I have a megger MFT1730 which tests do i need to carry out.
c) any advice on this would be greatly appriciated