City and Guilds 2330 UNIT 1 (questions 1 -10)

Help Support Talk Electrician Forum:

dasane1

Member
Joined
Feb 14, 2008
Messages
37
Reaction score
0
1 Under the Health and Safety at Work Act 1974 it is the duty of the employer to ensure

a) a nurse is avilable at all times

B) the safety,health and welfare of all employees

c) that all employees have basic first aid training

d) emergancy drills are caried out monthly

2 The Health and Safety at Work Act 1974 puts a duty of care upon

a) both employees and the general public

B) both employees and employers

c) only employees

d) only employers

3 Which of the following Regs requires precaution to be taken against the risk of death or personal injury from electricity

a) IEE Regs

b)Electricty continuity Regs

c)Electricty at work Regs

d) Building Regs

4 The HASAWA 1974(SECTIONS 2,3,4) puts a duty of care upon employers and employees to ensure the safety of all

a) persons using the premises

B) trade people using the premises

c) public using the premises

d) compant personel using the premises

5 Which one of the following is a statutory regulation

a) BS specification

B) Codes of Practice

c) IEE regs

d) Electricity at Work Regs

6 The EAWR 1989 applies to all electrical equipment from battery up to

a)400v

b)230v

c)11kv

d)400kv

7 If an accident occurs on faulty equipment the action to be taken would be to

a) repair the equipment immediatly

B) dismantle the equipment

c) return the equipment to the manufacturer

d) preserve the equipment pending inspection by the Health and Safety inspectorate

8 Where is the HASAWA act 1974 applicable

a) factories

B) construction sites

c) domestic premises

d) commercial buildings

9 The PPE at work regs 1992 require that every employer shall provide personal protective equipment which is

a} marked with the employers name

B) replaced by the employer if lost or stolen

c) in compliance with BS7671

d) maintianed in and effective state and in good repair

10 The most suitable PPE for use in an area with a risk of falling objects would be

a) goggles

B) ear defenders

c) hard hat

d) knee pads

 

Admin1

Forum Founder
Joined
Feb 6, 2008
Messages
10,278
Reaction score
-1
Thanks Darron,

Are they the one that you had in your 202 exam, Mate?

They look very much like the one that I had on my 201.

But there again, H&E are big in exams now - and will be repeatd all exam units.

Thanks Again Mate.

 

Admin1

Forum Founder
Joined
Feb 6, 2008
Messages
10,278
Reaction score
-1
The actual 202 exam?

You're a Top Man, Darron.

:D

 

Admin1

Forum Founder
Joined
Feb 6, 2008
Messages
10,278
Reaction score
-1
I look forward to Tomorrow's editon.

:)

 

dasane1

Member
Joined
Feb 14, 2008
Messages
37
Reaction score
0
unit 201 is health and safety unit 202 is principles of electro technology

Regards Darron

 

dasane1

Member
Joined
Feb 14, 2008
Messages
37
Reaction score
0
ill put some 202 on tommorow you need to look at symbols , resistors in sieries ,parralell , both together.

Resestivity, also be able to tell your exsposed and extreneous apart (exscuse the spelling)

I done both exams 201 and 202 together last year ive read a lot of your posts you seem to have a good grip of it youll fly through my friend

Regards Darron

 

jrthree

Junior Member
Joined
Feb 26, 2008
Messages
7
Reaction score
0
if i remember rightly the 202 is split so in order to pass you have to get a pass mark on both sections otherwise you fail that section, quite a few in my group failed this one last year and the resits so dont take it too lightly its not as easy as the 201.

 

Stuntmuffin

Junior Member
Joined
Feb 20, 2008
Messages
3
Reaction score
0
true^

also each person taking each exam will have different questions.

so just because you had these doesnt mean everyone else did/will aswell.

;)

 

Latest posts

Top