crabtree split load boards

[dean mac]

hi guys im picking up a crabtree splitload board tomoz off my mate its 5 +5 what i want to know is can i move the rcd across to the left 3 spaces so it becomes a 2 + 8 thanks in advance

 

[sparky007]

hi D.

not usually mate as the neutral bars are split accordingly and the bus bar is pre-cut.

 

[dean mac]

hi D.not usually mate as the neutral bars are split accordingly and the bus bar is pre-cut.

thanks sparky ur right

 

[SPECIAL LOCATION]

Crabtree do actually do a various selection of bus -bar arrangements.

although.. 99.9% are the bog-standard arrangements we all keep seeing.

Page 106 or the Crabtree brochure, (pg 108 of the PDF file)

http://www.electrium.co.uk/Crabtree2007(1).pdf

shows a whole bunch of part numbers?

if any meet your needs your local wholesaler may be able to get one that you can slot into your board! ?:| :|

 

[dean mac]

Crabtree do actually do a various selection of bus -bar arrangements.although.. 99.9% are the bog-standard arrangements we all keep seeing.

Page 106 or the Crabtree brochure, (pg 108 of the PDF file)

http://www.electrium.co.uk/Crabtree2007(1).pdf

shows a whole bunch of part numbers?

if any meet your needs your local wholesaler may be able to get one that you can slot into your board! ?:| :|

thanks special very helpful

 

[seajayess]

If its a Starbeaker CU the MCBs stab in so if you require a different configuration you will need a different buz bar, plus with 17th. edition you should try and split the circuits up so that in the event of 1 RCD tripping you do not lose complete power to the property. Hope this helps CJS