Cutting close to a wall edge?

Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Sharpend

"It Just Is"
Joined
Feb 13, 2012
Messages
9,684
Reaction score
898
Location
Here There and Everywhere
I’m on the lookout for suggestions.
I need to cut as close to the edge of floor as possible to replace some damaged flooring board, any suggestions what to use, I thought multi tool but too much to do and can’t guarantee straight nor depth.
Circular saw leaves too much away from wall.
? I thought there was a tool that cut close to an edge??
 
the tracks have a rubber edge - this sticks out further than the track and upto the blade . when you first use it, it cuts the rubber to the blade, so you can line up the track to your marks on whatever your cutting
 
the tracks have a rubber edge - this sticks out further than the track and upto the blade . when you first use it, it cuts the rubber to the blade, so you can line up the track to your marks on whatever your cutting

Foolishly thought you had read the MI
😂😂😂😂😂😂
It needs doing carefully. If done correctly the cuts are totally 'breakout free'
Make sure the floor/surface is dust free before laying the track down. They are remarkably slip free. Really clever but simple idea
 
Top