Normal
the peak supply is to a 500watt heater in the fromt, i believe whatever size duoheat you have. the instructions say not driectly connected to 30amp supply, so you can go through a switched fused spur.The off peak requires a further two poles of isolation.And if you are linking them to the dimplex control system via the pilot wire method you will have another pole to isolate.So thats 5 in total, one swithced fused spur, one DP switch and one architrave switch or something similar.I found this out the hard way a few years ago when dimplex technical still didnt have a clue about these.
the peak supply is to a 500watt heater in the fromt, i believe whatever size duoheat you have. the instructions say not driectly connected to 30amp supply, so you can go through a switched fused spur.
The off peak requires a further two poles of isolation.
And if you are linking them to the dimplex control system via the pilot wire method you will have another pole to isolate.
So thats 5 in total, one swithced fused spur, one DP switch and one architrave switch or something similar.
I found this out the hard way a few years ago when dimplex technical still didnt have a clue about these.
