Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Reptech" data-source="post: 559423" data-attributes="member: 38266">Wanting to get all my ducks in a row before diving in further I've been trying and trying to locate (any) service info but to no avail... (and I'll post all this because in months and years to come it might help others)As regards specific info on how to set/program the heater size (the kWh rating) if the main PCB is replaced I have turned absolutely nothing up. I tried the different button presses and actually discovered a couple of really hidden options, one a % increase setting in charge time and another with three (I think it was three) user/engineer enterable on/off charging periods. That was a scary one... Time to attack this from a different angle. I started looking up 'User Interface Panels' because on the Quantum range it seems like you can program these to suit all models in the range but when it comes to the XLE series it seems each User Interface Panel is actually unique and with its own different part number. That could be the answer and explain a lot.So it seems I might be searching for a programming option that probably does not even exist. The info is Interface Panel specific and permanently written into the small interface panel. Of course that begs the question... which board might be faulty?</blockquote>