Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Green Renewable Energy Forum
Solar PV Forum
emlite eca2 generation meter
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Talk Electrician Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="David_1224" data-source="post: 554529" data-attributes="member: 37856"><p>John</p><p>It depends on where in the system this is wired in.</p><p>Do you have the schematic for your system?</p><p>In most installations this meter sits between the inverter and the junction block where the PV system feeds into the supply between the utility meter and the consumer unit.</p><p>In which case if it was the .nz version it would record "total" export from your system (PV + Battery), total import from grid (if any to charge the battery) and the net production, which is Export minus import, and it cycles through the 3 readings.</p><p>In this position however it will only tell you what's being produced, it can't distinguish as to what goes to load and what goes to grid.</p><p>That need a measurement in the grid side of the installation.</p></blockquote><p></p>
[QUOTE="David_1224, post: 554529, member: 37856"] John It depends on where in the system this is wired in. Do you have the schematic for your system? In most installations this meter sits between the inverter and the junction block where the PV system feeds into the supply between the utility meter and the consumer unit. In which case if it was the .nz version it would record "total" export from your system (PV + Battery), total import from grid (if any to charge the battery) and the net production, which is Export minus import, and it cycles through the 3 readings. In this position however it will only tell you what's being produced, it can't distinguish as to what goes to load and what goes to grid. That need a measurement in the grid side of the installation. [/QUOTE]
Insert quotes…
Verification
Post reply
Green Renewable Energy Forum
Solar PV Forum
emlite eca2 generation meter
Top