Hi
I am fairly new to the game so need some advice with this one please.
I was recently asked to fit a bathroom fan heater. when doing a pre start survey i found that i couldnt get to a socket or ring main cable to spur off for the double pole switch.(its a ground floor flat)
When i checked the board the previouse spark had linked a 30mA rcd to the buzz bar with 6mm cable and ran the ringmain from this.
Firstly is this acceptable and secondly if so can i link my bathroom fan into the rcd along with the 2.5mm ring main cables.
Hope i have explained this ok and you can help
I am fairly new to the game so need some advice with this one please.
I was recently asked to fit a bathroom fan heater. when doing a pre start survey i found that i couldnt get to a socket or ring main cable to spur off for the double pole switch.(its a ground floor flat)
When i checked the board the previouse spark had linked a 30mA rcd to the buzz bar with 6mm cable and ran the ringmain from this.
Firstly is this acceptable and secondly if so can i link my bathroom fan into the rcd along with the 2.5mm ring main cables.
Hope i have explained this ok and you can help