Hagar 3ph Boards

Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
iirc hager MCB busbar design has never changed so any hager device should fit

2.6kw 3 phase is around 4a. id be looking at a smaller MCB, although 20 would probably be fine. equipment probably has its own fuses / overload on the motor anyway

 
One of the reasons I like Hager (and chose that for my own house)  is they don't keep messing with the size and appearance of the mcb's so a current one will fit an ancient board and will still look the same, unlike Wylex, Crabtree, MK etc etc etc.

 
I used the full sized Hager rcbo's in my all rcbo board.   I made sure I fitted my board in December 2015 so it's the older design with a metal case the the front is plastic. I think in the 3 phase boards there might not be so much room so you would have to use the compact ones.

House is not yet finished. We are living in it now, but still a lot to do. Someone coined a phrase, 90% complete, only 90% left to do. 

 
Top